hi there, has anyone designed their own rotary axis for their plasma?
i have a 4 axis candcnc system and im interested in being able to use round and square tube but unsure on the best way to rotate the tube etc.
thanks
chris
rotary plasma diy design
-
acourtjester
- 6 Star Elite Contributing Member
- Posts: 8182
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: rotary plasma diy design
There are several designs you can copy, one posted here in another category (tips and tricks). Here is one I did years ago very simple.
here is one Joe Jones built too.
here is one Joe Jones built too.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
mcmental
- 2.5 Star Member
- Posts: 136
- Joined: Thu May 14, 2020 10:06 am
Re: rotary plasma diy design
thanks for that i'll have a look at those tomorrow.acourtjester wrote: ↑Wed Nov 20, 2024 4:27 pm There are several designs you can copy, one posted here in another category (tips and tricks). Here is one I did years ago very simple.
here is one Joe Jones built too.
