rotary plasma diy design

CandCNC plasma table components discussion forum
Post Reply
mcmental
2.5 Star Member
2.5 Star Member
Posts: 136
Joined: Thu May 14, 2020 10:06 am

rotary plasma diy design

Post by mcmental »

hi there, has anyone designed their own rotary axis for their plasma?
i have a 4 axis candcnc system and im interested in being able to use round and square tube but unsure on the best way to rotate the tube etc.
thanks
chris
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8183
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: rotary plasma diy design

Post by acourtjester »

There are several designs you can copy, one posted here in another category (tips and tricks). Here is one I did years ago very simple.


here is one Joe Jones built too.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
mcmental
2.5 Star Member
2.5 Star Member
Posts: 136
Joined: Thu May 14, 2020 10:06 am

Re: rotary plasma diy design

Post by mcmental »

acourtjester wrote: Wed Nov 20, 2024 4:27 pm There are several designs you can copy, one posted here in another category (tips and tricks). Here is one I did years ago very simple.


here is one Joe Jones built too.
thanks for that i'll have a look at those tomorrow.
Post Reply

Return to “CandCNC Forum”