New 2" X 72" Belt Grinder for sale

[acourtjester]

New 2” X 72” Belt Grinder

Newly constructed belt grinder with new 2 HP 3 PH motor and single Phase 220 volt AC to 3 Phase VFD. The power cable is long enough so the VFD can be located away from the grinder to keep metal dust out. The grinder has a tilting belt setup and the grinding table can be tilted as well. This is custom build using 1/4” walled square tubing and 3/8” steel plate. Is sold as shown with 2 new belts. Part of my hobby is building Tools and this is the sixth of these belt grinders I built. I use one in my shop and the others were sold. This will be the last I will build. Attached image shows the grinder I use with the new one. 3/8" steel parts cut on my DIY plasma table.
Price is $900. cash to be picked up at my location.
Video of the grinder from the Google drive.

[adbuch]

Tom - very nicely done!! If I were close by, I would come have a look. Good luck with your sale.
David

[acourtjester]

Here are 2 videos showing 2 optional attachments I built for my grinder, they do not go with the one I'm selling. Just to show additional uses for the grinder.

[Dirtmotor]

I would buy it right now if I could drive down there and pick it up .

[acourtjester]

Where are you coming from??? I am in the Norther West corner of Florida just off I10.

[adbuch]

That's an very nice tool for the price. I think I paid over $600 for my Grizzly knife sanders back in 2017 and they don't have nearly the capability of the tool that Tom has built. This is a great deal!!

David

[Dirtmotor]

Where are you coming from??? I am in the Norther West corner of Florida just off I10.

North west corner of arkansas , I would love to have one of your belt grinders but you are too far away .

[adbuch]

Where are you coming from??? I am in the Norther West corner of Florida just off I10.

North west corner of arkansas , I would love to have one of your belt grinders but you are too far away .

Maybe disassemble it and box it up and ship it UPS ground. If you sign up for Stamps.com, you will get a good discount - much cheaper than going to the UPS store and paying full retail.

David

[acourtjester]

I did crate up the last one and sent it to guy in California by he setup the shipping pickup and payment. This thing is not light and a wooded crate will add to the price sorry. But if your will I can do that again. Not sure if the plywood covering is needed.

[adbuch]

What are the dimensions of the crate and how much does it weigh? If it's over about 90 lbs, then probably UPS freight would be the way to go.
David

[kicktillmonday]

Great looking unit and great price. I have been wanting one but surprised by how much a Burr King or something similar costs. Would come grab one if you were closer. Nice work Tom.

[acourtjester]

To sweeten the deal I will crate the grinder for shipping free, you arrange for shipping. The last one I sold went to Southern California, he had a trucking company come by and pick it up at my home. I think is was Few Ex ground but could be wrong on that.

[kicktillmonday]

To sweeten the deal I will crate the grinder for shipping free, you arrange for shipping. The last one I sold went to Southern California, he had a trucking company come by and pick it up at my home. I think is was Few Ex ground but could be wrong on that.

Thanks Tom, that certainly would sweeten the deal for anyone interested. I know that the exchange rate to USD, freight, duty, brokerage, taxes, etc to get that me would cost more than I could spend right now. I am sure someone in the USA will take this off your hands, it's a great looking unit. Good luck Tom

[acourtjester]

Thanks Have fun

[adbuch]

Tom - have you had any luck with the sale of your Belt Grinder? It looks like a quality tool that most any fabricator would be lucky to have in their workshop.

David

[acourtjester]

No I still have it, My guess nobody wants to have a vacation in Florida and pick it up.
Here are some auxiliary shafts I built for the one I use, allows the base to drive other wheels for different jobs. One used those fiber wheels for surface cleaning, and the other is for a wire wheel, Flap sanding discs, or polishing wheels. These are shown in the attached Videos. They do not go with the one I'm selling, easy to built.

[adbuch]

Tom - those are some great accessories for the belt grinder! Some creative thinking on your part. I have not seen large flap wheels like the ones you show. Did you make them?

Thanks,
David

[Dirtmotor]

Nice ! As usual I am amazed at your skills in fabrication . Thanks

[acourtjester]

Yes sir drew up the disc in Inkscape and routed on my table, 3-D printed the spacers for glue up alignment. I used 3/4" plywood for the discs, the brushes are calls chemical brushes for a wide bristle.

disc 5.5 inch 14 slots new brush last.dxf

(12.05 KiB) Downloaded 8 times

disc 5.5 inch 14 slots new brush last.dxf

(12.05 KiB) Downloaded 8 times

[plasmanewbie]

Never seen anything like that. Super cool Tom. Amazed as always.

[acourtjester]

Thanks guys

Ah shucks 2 Gif file.gif (3.48 MiB) Viewed 825 times

Ah shucks 2 Gif file.gif (3.48 MiB) Viewed 825 times

[adbuch]

Yes sir drew up the disc in Inkscape and routed on my table, 3-D printed the spacers for glue up alignment. I used 3/4" plywood for the discs, the brushes are calls chemical brushes for a wide bristle.
disc 5.5 inch 14 slots new brush last.dxf
DSCN0527.JPG
DSCN0528.JPG
DSCN0567.JPG
DSCN0568.JPG

Tom - that's quite a project to make those rotary flap discs. Could you show an example of what it actually does to the metal when you use it. Maybe before/after pictures, or a video showing it being used. I'd really like to see how effective it is - just in case I might want to make one.

Thanks,
David

[acourtjester]

Will see what I can do with a video.

[adbuch]

Will see what I can do with a video.

[acourtjester]

Flap disc movie