NC Files

[johantabbrink@gmail.com]

Good Day
I have some NC files for Plasma and Router Cut profiles.
Would like to import and save as DXF profiles

Thanks
Johan

[kicktillmonday]

Good day Johan, give this tool a try https://www.scorchworks.com/Gcoderipper ... ipper.html it has worked well for me in the past. Let us know if it works for you

[acourtjester]

That may be interesting as you want to go backward in the process. I see a possible problem as the NC file creation will introduce optional components in the file. Like different g-code elements or functions that are not in a TAP file. I am not saying it cannot be done but will these things effect the end produce, ie the DXF file not being dimensionally correct. I would do some testing with a known DXF file run through a program to generate a NC file and the through the reverse process to check its results. There controller software the will except either type of file and work fine.

[adbuch]

I have use this in the past with fine results.

G-Code Ripper 6.jpg (64.84 KiB) Viewed 3745 times

G-Code Ripper 6.jpg (64.84 KiB) Viewed 3745 times

G-Code Ripper 8.jpg[/attachment ][attachment=1]G-Code Ripper 9.jpg

[adbuch]

1001 usa 20 ipm2 .nc.dxf

(19.78 KiB) Downloaded 14 times

1001 usa 20 ipm2 .nc.dxf

(19.78 KiB) Downloaded 14 times

1001 usa 20 ipm2 ripped.dxf

(250.05 KiB) Downloaded 13 times

1001 usa 20 ipm2 ripped.dxf

(250.05 KiB) Downloaded 13 times

drawing.dxf

(2.38 MiB) Downloaded 11 times

drawing.dxf

(2.38 MiB) Downloaded 11 times

G-Code Ripper project.dxf

(24.11 KiB) Downloaded 13 times

G-Code Ripper project.dxf

(24.11 KiB) Downloaded 13 times