Now I can install these cards into two of my PCs that have been displaying communication errors. I HOPE this will resolve the communication issues!
Joe
A GOOD Parallel Port Card for PlasmaCam!
-
Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3486
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
A GOOD Parallel Port Card for PlasmaCam!
They arrived! Two brand new LF1119KB AXXON full 5vdc PCIe parallel cards with 10-foot official IEEE-1284 Compliant parallel cables directly from Amazon! They arrived in only one day!
Now I can install these cards into two of my PCs that have been displaying communication errors. I HOPE this will resolve the communication issues!
Joe
Now I can install these cards into two of my PCs that have been displaying communication errors. I HOPE this will resolve the communication issues!
Joe
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
-
rdj357
- 4 Star Elite Contributing Member
- Posts: 1185
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: A GOOD Parallel Port Card!
They are absolutely the best card on the market for PlasmaCAM machines. I have not had a single noise communication error since switching to their card and a 15' cable 6 or so years ago.
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
-
Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3486
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: A GOOD Parallel Port Card for PlasmaCam!
I installed one into a HP tower today. It will go out to the shop tomorrow for some testing. The older DELL OPTIPLEX PCs are not reliable for the PlasmaCam tables. Their parallel ports are too weak, and I really do not know if it is the latest DesignEdge update 
or something else. However, suddenly, they seem unable to maintain a connection to the USB corded keyboard and mouse. They were working fine BEFORE the 4.57 update, so I can only assume ....
Joe
or something else. However, suddenly, they seem unable to maintain a connection to the USB corded keyboard and mouse. They were working fine BEFORE the 4.57 update, so I can only assume ....Joe
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
-
Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3486
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: A GOOD Parallel Port Card for PlasmaCam!
I moved the Pc to the shop. The LF1119KB parallel card worked flawlessly! Get 'em from Robert Johnson, or from Axxon directly.
Joe
Joe
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
-
AREA
- 3 Star Member
- Posts: 302
- Joined: Thu Jul 19, 2012 3:36 am
Re: A GOOD Parallel Port Card for PlasmaCam!
Appreciate the advice and review. Thanks guys, will check out Roberts site 
