Powermax 45xp Arc Voltage Connection

CandCNC plasma table components discussion forum
Post Reply
bogger44
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 106
Joined: Fri Dec 26, 2008 5:48 am
Location: alberta, Canada

Powermax 45xp Arc Voltage Connection

Post by bogger44 »

hi i bought a new 45xp without the cpc port do i need the voltage divider card in it or can i hook up internally like the pm 1000? where to hook up would be great too. Thanks
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2024
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: powermax 45xp

Post by djreiswig »

Toward the bottom is a link for the instructions to connect to raw arc voltage. You don't need the kit, just hook to the internal terminals. This is assuming you are using raw arc voltage on your 1000.
https://www.plasmaspider.com/viewtopic.php?t=23117
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10138
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: powermax 45xp

Post by adbuch »

Connect as shown to monitor raw arc voltage. If you need a voltage divider, then wire it between the raw arc voltage cables and your thc.
David
45xp.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Post Reply

Return to “CandCNC Forum”