Sprocket file

Post by **Bently15** » Mon Jun 20, 2022 7:51 am

I'm looking for a file to cut a 18 tooth 1" bore sprocket for a #40 chain, any help will be appreciated

Post by **acourtjester** » Mon Jun 20, 2022 9:11 am

I have used this company for years
https://www.surpluscenter.com/Brands/Co ... 3-18-E.axd

Post by **Joe Jones** » Mon Jun 20, 2022 11:22 am

Bently15 wrote: Mon Jun 20, 2022 7:51 am I'm looking for a file to cut a 18 tooth 1" bore sprocket for a #40 chain, any help will be appreciated

Is this what you need?

Joe

18 TOOTH GEAR.dxf

18 TOOTH GEAR JPG.jpg

Post by **adbuch** » Mon Jun 20, 2022 4:31 pm

acourtjester wrote: Mon Jun 20, 2022 9:11 am I have used this company for years
https://www.surpluscenter.com/Brands/Co ... 3-18-E.axd

Thanks for the great find Tom! I will most definitely bookmark this one for future reference.
David

SegoMan DeSigns · Post by **SegoMan DeSigns** » Mon Jun 20, 2022 6:23 pm

They are the best, the majority of the press brake components came from them

They have the best parts / breakdown of any company out there and it is only 2 day ground to get it to KommieRado

Post by **adbuch** » Mon Jun 20, 2022 6:38 pm

SegoMan DeSigns wrote: Mon Jun 20, 2022 6:23 pm They are the best, the majority of the press brake components came from them They have the best parts / breakdown of any company out there and it is only 2 day ground to get it to KommieRado

I'm glad to hear that! And fast shipping too.
Thanks for sharing your experience with them.
David

SegoMan DeSigns · Post by **SegoMan DeSigns** » Mon Jun 20, 2022 8:10 pm

adbuch wrote: Mon Jun 20, 2022 6:38 pm
SegoMan DeSigns wrote: Mon Jun 20, 2022 6:23 pm They are the best, the majority of the press brake components came from them They have the best parts / breakdown of any company out there and it is only 2 day ground to get it to KommieRado
I'm glad to hear that! And fast shipping too.
Thanks for sharing your experience with them.
David

Yeah I hate sites that take longer to look up the parts than order it, Surplus Center has the ever expanding tree you can select from. Now if I could only fix KommieRado back to where is was Pre-Kali

Post by **Joe Jones** » Tue Jun 21, 2022 10:12 am

Wasn't the OP looking for a cut file for the sprocket?

Joe

.

Post by **plasmanewbie** » Tue Jun 21, 2022 12:59 pm

Joe Jones wrote: Tue Jun 21, 2022 10:12 am Wasn't the OP looking for a cut file for the sprocket?

Joe
.

That was my take on it. Looks like he got 2 options

Post by **Bently15** » Tue Jun 21, 2022 2:00 pm

Joe Jones wrote: Mon Jun 20, 2022 11:22 am
Bently15 wrote: Mon Jun 20, 2022 7:51 am I'm looking for a file to cut a 18 tooth 1" bore sprocket for a #40 chain, any help will be appreciated
Is this what you need?

Joe

18 TOOTH GEAR.dxf

18 TOOTH GEAR JPG.jpg

Thanks so much i'll give it a try.

Post by **harrymorley** » Wed Jun 22, 2022 1:59 pm

I use this site all the time..and its free
http://www.idleamusements.com/?page_id=367

Post by **adbuch** » Wed Jun 22, 2022 4:32 pm

harrymorley wrote: Wed Jun 22, 2022 1:59 pm I use this site all the time..and its free
http://www.idleamusements.com/?page_id=367

Thanks Harry! That's another good source to have. I will most definitely bookmark it for future use.
David

jkesler89 · Post by **jkesler89** » Fri Aug 19, 2022 12:52 pm

Can someone do a 52 tooth for a #40 chain?

Post by **Joe Jones** » Fri Aug 19, 2022 2:27 pm

What is the roller diameter and the pitch of the chain? .312" x .5", I assume.

You did not specify the shaft diameter, so you may need to change this.

Joe

52 tooth #40 sprocket.dxf

jkesler89 · Post by **jkesler89** » Fri Aug 19, 2022 4:03 pm

Joe Jones wrote: Fri Aug 19, 2022 2:27 pm What is the roller diameter and the pitch of the chain? .312" x .5", I assume.

You did not specify the shaft diameter, so you may need to change this.

Joe

52 tooth #40 sprocket.dxf

It worked perfect. I did scale the center hole to what i needed but, it its perfect. Thanks

Post by **Joe Jones** » Fri Aug 19, 2022 6:21 pm

jkesler89 wrote: Fri Aug 19, 2022 4:03 pm
It worked perfect. I did scale the center hole to what i needed but, it its perfect. Thanks

I am glad I could help you.

Joe

.

Post by **adbuch** » Sat Aug 20, 2022 10:28 am

This is a great resource as well. Thanks for that tip.
David

great resource.jpg

Post by **ROKCRLER** » Mon Aug 22, 2022 10:10 am

I ran across this site and thought you might like, i have not used it yet.

https://geardxf.software.informer.com/

Sprocket file

Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file

Re: Sprocket file