If I want to cut two rectangles and share one side(cut) how would I do that in sheet cam?
The first rectangle should cut all 4 sides, then the second cut should just cut 3 sides.
Seems simple enough, but I have been trying to do this for the past hour and can not get anything to work
nest two object to share one cut?
-
lancepr
- 1.5 Star Member
- Posts: 28
- Joined: Mon Apr 22, 2019 9:45 am
-
beefy
- 4 Star Member
- Posts: 1499
- Joined: Fri Jan 18, 2013 3:19 am
Re: nest two object to share one cut?
.
Last edited by beefy on Wed Sep 09, 2020 10:03 am, edited 1 time in total.
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
-
djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 2069
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: nest two object to share one cut?
Make sure you adjust for the kerf on the shared edge on the second part.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
lancepr
- 1.5 Star Member
- Posts: 28
- Joined: Mon Apr 22, 2019 9:45 am
Re: nest two object to share one cut?
I see, I was trying to do it in sheetcam, but it looks like you have to do it in the drawing app.
I was hoping to be able to duplicate say 6 squares and share cuts, but it looks like that is not possible.
I was hoping to be able to duplicate say 6 squares and share cuts, but it looks like that is not possible.
