Koike 5x10
-
WildTimeFab
- 1/2 Star Member
- Posts: 1
- Joined: Sun Jan 01, 2012 8:19 pm
Koike 5x10
I'm new here and would like to thank everone here for sharing so much info. Def. the best site I have found. Now I have a 98-2000? koike 5x10 table, using C-cut software. and have no comunication between comp. and machine. Can anyone tell me where to start. I have checked connections at both ends and found nothing wrong. I am in lower Mi. if anyone knows someone in my area, that might help get it going again. I am looking to sell it once it is working, I have already replaced it with a torchmate x 5x10. love the new table. But need to unload the old one.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
jimcolt
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: Koike 5x10
Contact Koike tech service and ask them if they have any service reps in your area. Koike is in Arcade NY...about an hour from Buffalo. There are many tech guys out there that can help you with that machine...it is a relatively common system.
Jim Colt Hypertherm
Jim Colt Hypertherm
