Settings in mach3

[Dooggins1]

Long story short I cleared my laptop bc I’m selling this machine and now the file for the setting in Mach3 are not loading correctly. I have gotten everything going so far up until it probes the metal. It goes down touches the metal but stops and throws a message like I hit the e stop button. Any help would be great.

[acourtjester]

Are you using a Floating head switch or a Ohmic sensor, they are configured differently in Mach.
G28 is for floating head and is configured as a home switch, G31 is the probe command and is configured as a probe input in Mach.