Joined this site in hopes to get answers to various questions about our CNC Plasma Table.
We currently have issues with our table but the main concern is the alignment of the servos.
Thanks for allowing us to join in the forum!
New to Site
-
Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3767
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: New to Site
Hi, tell me what table you have. It is difficult to answer questions without more information.
Joe
Joe
FREE DesignEdge Training Online Via ZOOM!
PlasmaCam 4x4 and 5x10 w/ ALL Upgrades
(14) X-TOOL LASERS
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
1,000 Watt 4x8 Fiber Laser Table
(2) X-TOOL Apparel Printers
(2) XTOOL MetalFab Machines
CreatBot D600 PRO
Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
Grizzly G0792 - Roll Bender
Langmuir MR-1 CNC Mill
PlasmaCam 4x4 and 5x10 w/ ALL Upgrades
(14) X-TOOL LASERS
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
1,000 Watt 4x8 Fiber Laser Table
(2) X-TOOL Apparel Printers
(2) XTOOL MetalFab Machines
CreatBot D600 PRO
Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
Grizzly G0792 - Roll Bender
Langmuir MR-1 CNC Mill
-
cccweld
- 1/2 Star Member
- Posts: 9
- Joined: Wed Feb 12, 2025 4:03 pm
Re: New to Site
We have an Apache Industries from Coffeyville KS
-
cccweld
- 1/2 Star Member
- Posts: 9
- Joined: Wed Feb 12, 2025 4:03 pm
Re: New to Site
The servos are out of alignment and of course the table does not cut straight. We also have issues with the THC. Never know when it is going to work or not. We use Mach 3 software.
-
Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3767
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: New to Site
Ah. I know nothing about your machine. Perhaps others can be of help.
Joe
FREE DesignEdge Training Online Via ZOOM!
PlasmaCam 4x4 and 5x10 w/ ALL Upgrades
(14) X-TOOL LASERS
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
1,000 Watt 4x8 Fiber Laser Table
(2) X-TOOL Apparel Printers
(2) XTOOL MetalFab Machines
CreatBot D600 PRO
Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
Grizzly G0792 - Roll Bender
Langmuir MR-1 CNC Mill
PlasmaCam 4x4 and 5x10 w/ ALL Upgrades
(14) X-TOOL LASERS
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
1,000 Watt 4x8 Fiber Laser Table
(2) X-TOOL Apparel Printers
(2) XTOOL MetalFab Machines
CreatBot D600 PRO
Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
Grizzly G0792 - Roll Bender
Langmuir MR-1 CNC Mill
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 11177
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: New to Site
You might try posting your questions at thecccweld wrote: Wed Feb 12, 2025 4:11 pm Joined this site in hopes to get answers to various questions about our CNC Plasma Table.
We currently have issues with our table but the main concern is the alignment of the servos.
Thanks for allowing us to join in the forum!
CNC Plasma Cutters General Forum located here.
https://plasmaspider.com/viewforum.php?f=3
David
-
weldguy
- 4.5 Star Elite Contributing Member
- Posts: 2314
- Joined: Fri Apr 17, 2009 11:48 am
Re: New to Site
Not familiar with your setup but it must have limit switches. Is there a button for each axis that sends the gantry to the limits switches?
