SL60 SL100 tips
-
carverbjs
- 1/2 Star Member
- Posts: 2
- Joined: Sun Feb 09, 2025 9:55 am
SL60 SL100 tips
new guy here I bought a box of consumable for sl60,sl100 plasma torch had 80 amp tips can I use these with i60 machine ? .box contained other parts that will fit my machine the tips were just extra thanks
-
Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3767
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: tips
I do not know what an "sl60" or an "sl100" plasma machine is. It would be helpful to include more details.carverbjs wrote: Sun Feb 09, 2025 10:11 am new guy here I bought a box of consumable for sl60,sl100 plasma torch had 80 amp tips can I use these with i60 machine ? .box contained other parts that will fit my machine the tips were just extra thanks
Joe
FREE DesignEdge Training Online Via ZOOM!
PlasmaCam 4x4 and 5x10 w/ ALL Upgrades
(14) X-TOOL LASERS
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
1,000 Watt 4x8 Fiber Laser Table
(2) X-TOOL Apparel Printers
(2) XTOOL MetalFab Machines
CreatBot D600 PRO
Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
Grizzly G0792 - Roll Bender
Langmuir MR-1 CNC Mill
PlasmaCam 4x4 and 5x10 w/ ALL Upgrades
(14) X-TOOL LASERS
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
1,000 Watt 4x8 Fiber Laser Table
(2) X-TOOL Apparel Printers
(2) XTOOL MetalFab Machines
CreatBot D600 PRO
Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
Grizzly G0792 - Roll Bender
Langmuir MR-1 CNC Mill
-
weldguy
- 4.5 Star Elite Contributing Member
- Posts: 2314
- Joined: Fri Apr 17, 2009 11:48 am
Re: tips
Yes, you can use those tips, the important thing is too not turn the amperage up higher than the tip is rated for or the lifespan of the tip will be dramatically reduced. If you have a 60 amp tip run it at 60 amps or less.
