I've added a Cooper Buckeye pneumatic drill to my plasma setup.
It's a buckeye automatic drill. All pneumatic. Soon I'll be installing a solenoid to send air to the triggering port. The solenoid is controlled by a relay and Mach 3.
For now, I have a post with a dwell command and just push the start button.
https://youtu.be/twUsAgDMvmo?si=wzB902Srw2Z19j-4
Adding a pneumatic drill to the plasma table.
-
Tristar500
- 2 Star Member
- Posts: 90
- Joined: Sat May 13, 2023 9:10 pm
- Location: NC
- Contact:
-
Dirtmotor
- 3 Star Elite Contributing Member
- Posts: 333
- Joined: Wed Aug 24, 2022 2:48 pm
Re: Adding a pneumatic drill to the plasma table.
Thats cool !
-
Tristar500
- 2 Star Member
- Posts: 90
- Joined: Sat May 13, 2023 9:10 pm
- Location: NC
- Contact:
