Newbie from Ocala florida
-
Vwmikey
- 1/2 Star Member
- Posts: 1
- Joined: Wed Oct 23, 2024 7:23 pm
Newbie from Ocala florida
Just wanted too say what's up. Going to learn to powder coat.
-
Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3771
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Newbie from Ocala florida
You will enjoy it!
Joe
Joe
FREE DesignEdge Training Online Via ZOOM!
PlasmaCam 4x4 and 5x10 w/ ALL Upgrades
(14) X-TOOL LASERS
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
1,000 Watt 4x8 Fiber Laser Table
(2) X-TOOL Apparel Printers
(2) XTOOL MetalFab Machines
CreatBot D600 PRO
Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
Grizzly G0792 - Roll Bender
Langmuir MR-1 CNC Mill
PlasmaCam 4x4 and 5x10 w/ ALL Upgrades
(14) X-TOOL LASERS
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
1,000 Watt 4x8 Fiber Laser Table
(2) X-TOOL Apparel Printers
(2) XTOOL MetalFab Machines
CreatBot D600 PRO
Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
Grizzly G0792 - Roll Bender
Langmuir MR-1 CNC Mill
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 11188
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Newbie from Ocala florida
Hi Vwmikey. I assume from your name that you are into VW's. Do you have a plasma table that you are using to cut the parts you want to powder coat?
If so, what kind of table do you have - and what software do you use to do your designs? There is a powder coating section of this forum that you may find useful.
viewforum.php?f=82
David
If so, what kind of table do you have - and what software do you use to do your designs? There is a powder coating section of this forum that you may find useful.
viewforum.php?f=82
David
