New user Looking for plasma grates

[509sledhead]

I have an old plasma table that hasn't been used in a while because it needs new grates. I am here looking for grate files for a 5x10' plasma table.

[Joe Jones]

What is the name of the table manufacturer? 5x10 grates can be made in many different configurations.

Joe

[hardworker]

hello, easiest option would be 1/8th flat stock at whatever height you need. if you need the holder for the slats, cut some slits in some flat stock an make a little frame to hold the slats. at least enough to get you up an running. good luck

[Joe Jones]

I could be more helpful if I knew which make and model of table you have.

Joe

[509sledhead]

Sorry for the delayed response. I found the grates I was looking for in the shared dxf section of this site!