Just wanted to share this. Since adding the plasma table to the shop I've been drawing out parts and such on single sheets of paper then upgraded to a roll and then I just recently realized I had a 4'x6' white out board not being used I put it on the table and was amazed!! (lol), other than making another hole (tapered) in my super simple pen?marker holder for the fine tip dry erase marker I was astonished all I had to do was wipe it off and I could almost utilize my whole table surface and draw multiple times, it certainly beats taping or weighting down the paper. Hopefully this can be useful info to some one.
RAYZORcut
White out Board
-
RAYZORcut
- 1.5 Star Member
- Posts: 35
- Joined: Wed Jan 18, 2023 11:35 am
- Location: Ontario,Canada
White out Board
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
martyy
- 2.5 Star Elite Contributing Member
- Posts: 158
- Joined: Sun Jul 17, 2022 9:43 pm
Re: White out Board
have you mistakenly used a Sharpie yet? You must move quickly after, if so!
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 10135
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: White out Board
Now that's a great idea!
David
David
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
TJS
- 3.5 Star Elite Contributing Member
- Posts: 764
- Joined: Wed Nov 26, 2014 1:22 pm
- Location: Fairfield, CT.
- Contact:
-
acourtjester
- 6 Star Elite Contributing Member
- Posts: 8182
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: White out Board
Thanks for sharing your optional attachment to your table, more member more ideas more tools. 
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
weldguy
- 4.5 Star Elite Contributing Member
- Posts: 2186
- Joined: Fri Apr 17, 2009 11:48 am
Re: White out Board
Great idea, love the creativity
-
SegoMan DeSigns
- 4 Star Member
- Posts: 981
- Joined: Sat Jan 06, 2018 4:45 pm
Re: White out Board
Never underestimate the creativity of this forumRAYZORcut wrote: ↑Thu Feb 09, 2023 7:20 pm Just wanted to share this. Since adding the plasma table to the shop I've been drawing out parts and such on single sheets of paper then upgraded to a roll and then I just recently realized I had a 4'x6' white out board not being used I put it on the table and was amazed!! (lol), other than making another hole (tapered) in my super simple pen?marker holder for the fine tip dry erase marker I was astonished all I had to do was wipe it off and I could almost utilize my whole table surface and draw multiple times, it certainly beats taping or weighting down the paper. Hopefully this can be useful info to some one.
RAYZORcut
WhiteBoard.JPG
-
SegoMan DeSigns
- 4 Star Member
- Posts: 981
- Joined: Sat Jan 06, 2018 4:45 pm
-
RAYZORcut
- 1.5 Star Member
- Posts: 35
- Joined: Wed Jan 18, 2023 11:35 am
- Location: Ontario,Canada
Re: White out Board
Just make hole a couple thou bigger then the marking pen/marker etc... zip tie around pen/marker with a little weight over top, I use a socket, works pretty good.
RAYZORcut
RAYZORcut
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
RAYZORcut
- 1.5 Star Member
- Posts: 35
- Joined: Wed Jan 18, 2023 11:35 am
- Location: Ontario,Canada
Re: White out Board
Just regular white out board eraser, they are dry erase markers.
RAYZORcut
RAYZORcut
-
RAYZORcut
- 1.5 Star Member
- Posts: 35
- Joined: Wed Jan 18, 2023 11:35 am
- Location: Ontario,Canada
Re: White out Board
I should mention I got the simple pen holder idea from table builder.
RAYZORcut
RAYZORcut
