Troubleshooting uneven hexagon

[DIYPlasmatable]

So iv been cutting on my DIY plasma table for 3-4 months with hexagons having all sharp corners, after loading the same file today i noticed halfway threw the cut (25 Hexagon cuts) that they were all like the photo provided... checked axis squareness, all good! changed consumables x2 still the same... not sure what it could be as it was working perfect yesterday... ill includes my table specs and just wondering if anyone else has ever seen this before and have a idea! thanks in advance!

4x8 Plasma table
Primeweld cut60 - 35amps - 75PSI
Belt Driven X and Y Axis, Tensioned and tight
MACH3 Control
C94 CNC4PC Board-UC300 Eth

16 gauge metal
2100 MM/Min

[plasmanewbie]

Another similar issue from yesterday that may be of some help here viewtopic.php?f=4&t=35056

[DIYPlasmatable]

Another similar issue from yesterday that may be of some help here viewtopic.php?f=4&t=35056

i actually seen that post just after making my post lol, should of browsed first thanks abunch tho appreciate it!

[plasmanewbie]

Hey no problem and post back if you figure it out

[DIYPlasmatable]

Hey no problem and post back if you figure it out

It helped out alot with my uneven hexagon now just trying to figure out a new issue...

viewtopic.php?f=3&t=35076