Show your Table..

Post by **Dennis** » Sun Feb 27, 2011 9:52 pm

We need a show your table thread... I think I will start it off..

hinesigns · Post by **hinesigns** » Sun Feb 27, 2011 10:10 pm

this is in the photo section but

all plazmatable 001.jpg

all plazmatable 002.jpg

all plazmatable 003.jpg

all plazmatable 004.jpg

all plazmatable 005.jpg

all plazmatable 006.jpg

K stylz · Post by **K stylz** » Mon Feb 28, 2011 11:39 pm

Those look like some pro set-ups, I like the cut away catch on "hinesigns" machine! I'll have to sweep up
my work area now and show my goods... y'all are setting the bar high!!

Eagle Mtn Metal Works · Tue Mar 01, 2011 2:25 am

Hey Dennis
If I could ever get my pictures to load

I could show you the new jib hoist set up that I built to load my table. Shop is to small for Fork lift.

Every time that I have tried to post pictures they fail due to the file is to big and for some reason I keep forgetting how to even post a zip file.

No not to post but how to get them in a zip, man getting old sucks

I would post some pictures of my set up if I could remember how. OH what I mean where am I

Hey we got snow on Sunday ,did you send it down?

PS How come your floor and table is so clean.

Is it for show?

WSS · Post by **WSS** » Tue Mar 01, 2011 3:25 am

The pics of the full table were taken when new. It does not look like that now.

WSS

WSS · Post by **WSS** » Tue Mar 01, 2011 3:31 am

Eagle Mtn D&D wrote:Hey Dennis
If I could ever get my pictures to load

email them to me, I will resize and send back to you. It's quick to do...

tom@metaltechus.com

WSS

pony · Post by **pony** » Tue Mar 01, 2011 8:46 am

Eagle Mtn D&D wrote:Every time that I have tried to post pictures they fail due to the file is to big

You can resize your pictures online here:
http://www.picresize.com

Another alternative is to post them to a site like Flickr and link to them on Flickr using the "Img" button when composing a post.

pony · Post by **pony** » Tue Mar 01, 2011 8:48 am

Dennis wrote:We need a show your table thread.

So, is it true, size doesn't matter

I'll post some pictures of my baby Torchmate 2x4 this weekend. No giggling at the back please...

Post by **Dennis** » Tue Mar 01, 2011 9:40 am

pony wrote:
Dennis wrote:We need a show your table thread.
So, is it true, size doesn't matter
I'll post some pictures of my baby Torchmate 2x4 this weekend. No giggling at the back please...

Its all right we won't laugh at you if you have a little one...

Post by **Dennis** » Tue Mar 01, 2011 9:45 am

PS How come your floor and table is so clean. Is it for show?

Floors so clean because I threw all the crap on the benches...

Post by **Dennis** » Tue Mar 01, 2011 9:48 am

WSS wrote:The pics of the full table were taken when new. It does not look like that now.

WSS

Nice looking table looks plenty sturdy!

AnotherDano · Post by **AnotherDano** » Tue Mar 01, 2011 7:46 pm

Hey Rod,

Go here.

It's free, but will ask if you want to purchase a full-blown version. I just ignore that.
All you do is right-click on the picture you want to resize and with a couple more clicks, it saves it as another pic - leaving the original as it was.

You can also add watermarks with it.

http://www.vso-software.fr/products/image_resizer/

Post by **Dennis** » Wed Mar 02, 2011 10:23 pm

Wheres everyones camera, only three of us on this site have tables..

the rest of you guys must have paid to much for your tables... should of saved a little for a camera

AnotherDano · Post by **AnotherDano** » Wed Mar 02, 2011 11:03 pm

Here's mine...

Post by **Mountain Home** » Wed Mar 02, 2011 11:41 pm

Here's some of mine.

Photo-0126.jpg

Photo-0124.jpg

101_0149.JPG

101_0148.JPG

WSS · Post by **WSS** » Wed Mar 02, 2011 11:53 pm

Randy, How do you like your Samson? I hear it is like a PlasmaCam on steroids.

WSS

Post by **Mountain Home** » Thu Mar 03, 2011 9:19 am

WSS wrote:Randy, How do you like your Samson? I hear it is like a PlasmaCam on steroids.

WSS

I like it, I am still learning how to use it but no problems so far.

Post by **BrianMick** » Thu Mar 03, 2011 10:27 am

we love our samson and it runs about 6 hours a day non stop for the past year. here is our table
Brian

Post by **Dennis** » Thu Mar 03, 2011 10:37 am

BrianMick wrote:we love our samson and it runs about 6 hours a day non stop for the past year. here is our table
Brian

Brian , what do you mostly produce , looks like a nice set up... That air system looks pretty nice .. Don't imagine you have much of a smoke issue.

Post by **BrianMick** » Thu Mar 03, 2011 10:48 am

Dennis wrote:
BrianMick wrote:we love our samson and it runs about 6 hours a day non stop for the past year. here is our table
Brian
Brian , what do you mostly produce , looks like a nice set up... That air system looks pretty nice .. Don't imagine you have much of a smoke issue.

we are a wholesale steel warehouse open to the public.....we cut anything from simple circles to as intricate parts as this machine can handle which for the most part is usually pretty good....it will never be a high end machine but it does the job....as far as the Farr collection system goes it is great....we don't lose any heat from the shop as it puts it right back (probably cleaner than when it first entered) no smoke or dust.......its a spendy machine though If I remember about 40k......and yesssssss if you drop a pair of glasses it will suck them in

Brian

Post by **tentonjj** » Sat Mar 05, 2011 11:18 am

Start of mine

Eagle Mtn Metal Works · Sat Mar 05, 2011 7:28 pm

Hi All
Thanks' to WSS helping to resizing the pic,

Thanks' again Tom. The pictures show the jib hoist that I designed and built to load the table.
I am running a 5000 cfm exhaust system down draft, NO smoke pulls it out to the out side.

pony · Post by **pony** » Sun Mar 06, 2011 10:25 am

So, my 2x4 table doesn't qualify for the smallest table on here, but I would like to be nominated for the messiest workshop....

My ATHC hasn't shipped yet

I'll post fresh pictures when it arrives and I can install it.

Eagle Mtn Metal Works · Sun Mar 06, 2011 10:39 am

Hey pony
And I tought my shop was to small:

Nice table

Post by **mdwalker** » Sun Mar 06, 2011 11:01 am

Just wanted to comment on Eagle Mtn D&D's picture showing the overhead crane. I had my table for almost 2 years before I built an overhead crane. If you don't have one, get one. Pick up aluminum cans and sell them if you have to to get the $$ to build one but get one. If you do much cutting you will make your money back in the time saved to load & move steel around not to mention wear and tear on your body. Besides the table, cutter, I would rank it as the next most important thing to have, along with good ventilation. Nice pictures and a clean shop Eagle Mnt.

Danny

Show your Table..

Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..

Re: Show your Table..