percision plasma/spark robotics

[Triple S]

just wondering if I can get a little advice from you guys , Iwas going to build a 5x10 plasma with plans from precision plasma and use the spark robotics .I have a hypertherm 65 and a very heavy duty table for the base have no problem on the building of the table /gantry but need to know if i will be able to put out a qualty product with this set up ,I have talked to Ron and seems like a good guy any help would be appreciated thak you Steve

[BTA Plasma]

Plasma machine results are only as good as the components, electronics and assembly allows. You are asking about results from the 2 biggest budget system kits available. Results may vary

[adbuch]

I would tend to agree with BTA.
David

[Triple S]

well Iam new to the site and have been doing a lot of looking around I guess that's what I'm looking for is quality components as i am going to build my own table but do not want cheap crap , sorry if posted in the wrong section as I'm still learning my way around thank you for the help

[Joe243672]

I did precision plasma gantry sold by cutting edge. With the blade runner g5 setup through c and cnc. My machine works awsome