Clear Coat

Learn and share top coat finishing techniques, experiences, and product knowledge here. Paint, anodize, rubber coating, etc.
Post Reply
vfauto
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Sun Feb 24, 2019 8:09 am

Clear Coat

Post by vfauto »

What type and brand Clear is everyone using?
User avatar
Scratch
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 835
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: Clear Coat

Post by Scratch »

I use Rustoleum 2x gloss and matte clear. I like the product, but I hate the stupid new spray tips, sometimes they only spray upside down, sometimes they clog right away... Ugh.. I hate them!
I think I'm the oldest 10 year old boy on the forum...
Thor
2.5 Star Member
2.5 Star Member
Posts: 169
Joined: Wed Jun 17, 2015 6:57 pm

Re: Clear Coat

Post by Thor »

https://www.amazon.com/gp/product/B001D ... UTF8&psc=1
used some of this the other day, looks nice goes on easy with a nice fan spray tip.
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8182
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Clear Coat

Post by acourtjester »

Hey Scratch I agree what I do is remove the tip and use compressed air to blow through the tip before I put it away.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1688
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Clear Coat

Post by tnbndr »

I use Rustoleum 2x gloss and matte clear. I like the product, but I hate the stupid new spray tips, sometimes they only spray upside down, sometimes they clog right away... Ugh.. I hate them
I use a lot of Rustoleum products and have a lot of issues with their paints and tips. I keep tips from used up cans stored in a container of paint thinner and switch them out, sometimes that works. Other times nothing will get the product out.
I keep random reciepts from the hardward store and return problem cans for exchange. It is a pain in the a**.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
User avatar
Scratch
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 835
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: Clear Coat

Post by Scratch »

I'm not always so sure it's the tips though... Sometimes I'll get a brand new can to stop after about 10 seconds of spraying. And if I remove the tip and push down on the straw that goes into the can, nothing still comes out. That's when I return them. I've never really had problems with the cans that have the old style tips and would just switch manufacturers, but it seems like most companies are going with these stupid new tip style cans.
I think I'm the oldest 10 year old boy on the forum...
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8182
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Clear Coat

Post by acourtjester »

Yes I wish Rustoleum would get the stuff straight, I have had the same problem with new cans, and other that would only spray if turned upside down. Now that fun, I think the drinking straw broke off the tip only way paint comes out is if the tip is below the paint in the can :-o
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10135
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Clear Coat

Post by adbuch »

acourtjester wrote: Tue Jan 21, 2020 9:59 am Hey Scratch I agree what I do is remove the tip and use compressed air to blow through the tip before I put it away.
I turn the can upside down to clear the tip, then soak the tips in a jar of lacquer thinner. I usually leave the tips in he lacquer thinner over night, then remove and blow out the orifice with compressed air.
David
abmetal
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 807
Joined: Mon Dec 26, 2011 8:37 pm
Location: Southeast Missouri

Re: Clear Coat

Post by abmetal »

The cans of Rustoleum that I use will continue to spray paint even when turned upside down so I just pop the nozzle off, blow air through it, and wipe it off. For me that took care of the clogged nozzles. And about six months ago I started putting the cans in a paint shaker for 1 minute before using and I haven't had one to stop up since.

Allen
RDillon
1.5 Star Member
1.5 Star Member
Posts: 26
Joined: Sun Jan 27, 2019 2:27 pm

Re: Clear Coat

Post by RDillon »

I am with Thor. You can't go wrong with Duplicolor. They also have a clear that's called Perfect Match. I have gotten good results with that too.

Randy
Carypipes
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Mon Feb 22, 2021 7:01 pm

Re: Clear Coat

Post by Carypipes »

i use alot of nason.462-00 dries fast
Post Reply

Return to “Paint & Other Top Coats”