fusion 360 in Arkansas
-
kenny boheler
- 1/2 Star Member
- Posts: 2
- Joined: Mon Sep 09, 2019 5:27 pm
fusion 360 in Arkansas
Anyone in Arkansas i can pay by the hour to teach me fusion 360?
-
plasmanewbie
- 5 Star Elite Contributing Member
- Posts: 2746
- Joined: Thu Jul 24, 2008 11:15 am
Re: fusion 360 in Arkansas
I'm no where near you but I use Fusion 360 sometimes and anytime I have had a question I have been able to find a video or tutorial to answer it. Lots of info out there or you can post our questions in the Fusion 360 forum here https://www.plasmaspider.com/viewforum.php?f=51 and likley get a timely and helpful reply
-
ctgolfer1
- 2 Star Member
- Posts: 86
- Joined: Thu May 30, 2019 4:35 pm
Re: fusion 360 in Arkansas
With just youtube videos you can learn it on your own. I had to and it worked out quite well.
Start with this one and advance in order, take notes on the cutting parts other then that just keep watching the videos over and over again following along in Fusion. It really is not as intimidating as it appears once you understand the basics. There are many, many other videos out there on fusion but these guys take it slow and explain stuff well as they go so knuckleheads like me can get it.
https://youtu.be/SNXwBgVVR-8
Start with this one and advance in order, take notes on the cutting parts other then that just keep watching the videos over and over again following along in Fusion. It really is not as intimidating as it appears once you understand the basics. There are many, many other videos out there on fusion but these guys take it slow and explain stuff well as they go so knuckleheads like me can get it.
https://youtu.be/SNXwBgVVR-8
