I'm working on a video series walking through the Design Edge software. I'm no videographer nor am I perfect but here's an attempt to start with the basics and walk through the software step by step, feature by feature to help anyone on their journey. Hopefully it will be in an order from basic to advanced that allows viewers to follow along and build on past videos (or experience) and pick up new things as they go.
It's fun for me to do so hopefully it helps someone! I will post new videos to this thread as I go.
https://youtu.be/uYQ5z9z2jhE
Design Edge Video Series
-
rdj357
- 4 Star Elite Contributing Member
- Posts: 1185
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Design Edge Video Series
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
-
little blue choo
- 4 Star Member
- Posts: 1458
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Design Edge Video Series
Sounds good Robert. I will be watching
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
krymis
- 2 Star Member
- Posts: 63
- Joined: Tue Aug 22, 2017 9:59 am
Re: Design Edge Video Series
Robert,
As a mentor to me you do a great job of teaching. Keep up the good work.
As a mentor to me you do a great job of teaching. Keep up the good work.
-
SeanP
- 4 Star Member
- Posts: 951
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Design Edge Video Series
Very well done, that will be great help for people I'm
sure.
sure.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
-
rdj357
- 4 Star Elite Contributing Member
- Posts: 1185
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: Design Edge Video Series
This week's video is pretty basic - just an intro into the coordinate system. Many of us are already intimately familiar with this but there may be something here that can help! I also cover one of the ways I use reference points when designing.
https://youtu.be/K2zHowWxK0o
https://youtu.be/K2zHowWxK0o
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
