I had a customer ask if there was a powder coat that would act like blackboard? I did some research and couldn't find anything, thought maybe someone has run across this before?
Thanks,
John
Powder Type Question
-
- 2.5 Star Member
- Posts: 170
- Joined: Sun Dec 19, 2010 2:54 pm
- Location: Van Wert, Iowa
- NDS
- 1 Star Member
- Posts: 12
- Joined: Fri Sep 14, 2012 1:31 pm
- Contact:
Re: Powder Type Question
Havent looked into it to much but just saw an add from powder buy the pound showing a powder they are calling white board. Not sure if it will help but it may be worth looking into
Precision Plasma 4x4 table
CandCNC electronics
Powermax 45 with hand torch
4x4x8 powder coat oven
http://www.kodiakmetalworks.com

CandCNC electronics
Powermax 45 with hand torch
4x4x8 powder coat oven
http://www.kodiakmetalworks.com

- NDS
- 1 Star Member
- Posts: 12
- Joined: Fri Sep 14, 2012 1:31 pm
- Contact:
Re: Powder Type Question
Guess I should have looked at the post date.......maybe it will help someone either way
Precision Plasma 4x4 table
CandCNC electronics
Powermax 45 with hand torch
4x4x8 powder coat oven
http://www.kodiakmetalworks.com

CandCNC electronics
Powermax 45 with hand torch
4x4x8 powder coat oven
http://www.kodiakmetalworks.com

-
- 2.5 Star Member
- Posts: 170
- Joined: Sun Dec 19, 2010 2:54 pm
- Location: Van Wert, Iowa
Re: Powder Type Question
Thanks for the info. I'll check with them.