Can anyone tell me how this company gets this color? Is it a patina?
http://www.overtons.com/modperl/product ... BER_446714
How do they get this color?
-
michmetalman
- 3.5 Star Member
- Posts: 566
- Joined: Wed Sep 19, 2012 6:43 am
-
abmetal
- 4 Star Elite Contributing Member
- Posts: 807
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
Re: How do they get this color?
BILL WORDEN CAN!! He's the patina king! (and any other finish you can think of)
-
steelfx
- 4 Star Elite Contributing Member
- Posts: 765
- Joined: Sat Oct 10, 2009 12:09 am
- Location: St. George, Utah
- Contact:
Re: How do they get this color?
I can't speak for Lazart's method of finishing, but the finish in the photo link is really easy.
You could get a nearly identical look using RUST F/X, followed by FLAME F/X GEL, the gel patina
being applied by dabbing (stippling) and/or lightly dragging the patina gel with a rough sea sponge or even a wadded up piece of burlap.
If your steel is already rusty, the FLAME F/X GEL will even work on that, but the TORCH F/X (liquid/spray patina)
will only work on top of the RUST F/X patina...won't have any effect on bare steel, shiny or rusted.
Bill
You could get a nearly identical look using RUST F/X, followed by FLAME F/X GEL, the gel patina
being applied by dabbing (stippling) and/or lightly dragging the patina gel with a rough sea sponge or even a wadded up piece of burlap.
If your steel is already rusty, the FLAME F/X GEL will even work on that, but the TORCH F/X (liquid/spray patina)
will only work on top of the RUST F/X patina...won't have any effect on bare steel, shiny or rusted.
Bill
