Hi Guys,
I'm still a Newb, just getting going, could you please give me your feedback on what i can charge, (or what you'd charge) for something like these. The red one is 36" long, the grey one roughly the same. These are intended to be wall hangers, the plasma price worksheet says 43 just for the cut steel. (am i way off on that?) Any advice here would be great!
Thanks! Doc.
What could i charge?
-
Doc Hollywood
- 2.5 Star Member
- Posts: 147
- Joined: Fri Jun 28, 2013 4:36 pm
What could i charge?
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
gamble
- 4 Star Member
- Posts: 950
- Joined: Thu Jan 02, 2014 6:33 pm
Re: What could i charge?
I can't do those excel files, as I have no idea to figure out how many pierces and total cut path etc etc.
Also it depends on how thick that material is too.
If it was me, and that material is my normal 14g, I'd probably charge $80-100 range. But then again I just fire at the hip with prices.
Also it depends on how thick that material is too.
If it was me, and that material is my normal 14g, I'd probably charge $80-100 range. But then again I just fire at the hip with prices.
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
-
Doc Hollywood
- 2.5 Star Member
- Posts: 147
- Joined: Fri Jun 28, 2013 4:36 pm
Re: What could i charge?
Thanks Gamble,
Forgot to mention they are 16 Ga. I was thinking right near that price also, since there is quite a bit of work in these.
Forgot to mention they are 16 Ga. I was thinking right near that price also, since there is quite a bit of work in these.
