Reference Guide

Hypertherm Plasma Cutter discussion forum.
Post Reply
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1102
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Reference Guide

Post by CNCCAJUN »

http://s2307.t.en25.com/e/es.aspx?s=230 ... 4f8b492e80


Just received, not sure if everyone received e-mail so I thought I would share . . .

Steve :D
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Top
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8528
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Reference Guide

Post by acourtjester »

Thanks filed away
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Top
User avatar
wilber
2.5 Star Member
2.5 Star Member
Posts: 147
Joined: Sun May 11, 2014 8:23 am

Re: Reference Guide

Post by wilber »

that is nice. Thanks for the post
*** DynaTorch Super B 4x8 with a Hypertherm Powermax 65****
Top
TWSalaska
1 Star Member
1 Star Member
Posts: 21
Joined: Thu Jun 26, 2014 8:34 pm

Re: Reference Guide

Post by TWSalaska »

good post thanks
Top
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1731
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:
Contact tnbndr

Re: Reference Guide

Post by tnbndr »

Nothing for PM45, whats up with that?
Dennis
ComMarker B6 Galvo MOPA Fiber Laser
Hypertherm PM30 Hand Torch
RolAir 3HP Single Stage 30 Gal
13.8scfm@100psi, 3450RPM
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3, Lightburn
Top
zachv
1.5 Star Member
1.5 Star Member
Posts: 26
Joined: Wed May 28, 2014 10:43 pm

Re: Reference Guide

Post by zachv »

tnbndr wrote:Nothing for PM45, whats up with that?
Ditto. The 45 seems to be among the most common machines for these tables.
Top
Post Reply

Return to “Hypertherm Plasma Cutters”