Do I cut the purple wire or the orange wire?

kgtanner · Post by **kgtanner** » Wed Jul 09, 2014 10:51 pm

I just bought a Powermax 45 to use on my PlasmaCam 98Z table. I will be using the hand torch, and the cutter will be used exclusively with the CNC table. So which trigger switch wire do I splice into for the control box wire. The purple or orange one.
Thanks,

Kenny

Post by **BTA Plasma** » Thu Jul 10, 2014 12:15 am

Both are for torch on. If your using a machine torch you can use the cpc and the Hypertherm latch cable

Do I cut the purple wire or the orange wire?

Do I cut the purple wire or the orange wire?

Re: Do I cut the purple wire or the orange wire?