Business card holder
-
anvilhead
- 2 Star Member
- Posts: 71
- Joined: Sat Dec 13, 2008 10:26 am
- Location: Nichols, SC
- Contact:
Business card holder
This is a design modification of a previously posted business card holder that was listed as "Contemporay Card Holder" (I think). This was made for my nephew who likes to think of himself as "The Deal Maker" so I made him a little something to represent his endeavors.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
There is plenty of room at the top - and the top is where you want to be. Whenever you do a project - do the hardest part first and the rest will be easy.
-
anvilhead
- 2 Star Member
- Posts: 71
- Joined: Sat Dec 13, 2008 10:26 am
- Location: Nichols, SC
- Contact:
Re: Business card holder
Tabs fold to hold the cards and the oval folds forward to form the base and the top "T" of the stem folds just a bit to tilt the cards back to keep them from falling off the tabs. Before fold the piece I stamp touchmarks on the bottom of the oval and a "MADE IN USA" stamp that I purchased from MSC for short money.
There is plenty of room at the top - and the top is where you want to be. Whenever you do a project - do the hardest part first and the rest will be easy.
-
Loyd
- 3.5 Star Elite Contributing Member
- Posts: 685
- Joined: Tue Nov 03, 2009 12:28 am
- Location: Bald Knob, AR
- Contact:
Re: Business card holder
Nice work. Thanks.
Loyd
Loyd
De inimico non loquaris sed cogites
Do not wish ill upon your enemies, plan it.
Do not wish ill upon your enemies, plan it.
-
38 Special
- 1.5 Star Member
- Posts: 46
- Joined: Fri Dec 18, 2009 8:12 pm
