Cutmaster 82 cut rates help

Little Leonard · Post by **Little Leonard** » Sat Sep 07, 2013 11:06 am

I'm running a td cutmaster 82 hand touch and wanted to see who you guys have your cut speeds set to. I'm cutting 14g and 3/16 for the most part. I've started off on 3/16 with 60amp, 70ipm with height set at .0564. I'm getting ok cuts but I just think it can do a lot better I've yet to get my thc working right so I've been cutting with it off. Any help will be great thanks guys and love this forum.

Post by **cnchybrid** » Sat Sep 07, 2013 11:56 pm

Who makes your THC?

Little Leonard · Post by **Little Leonard** » Sun Sep 08, 2013 9:51 am

Candcnc

Post by **cnchybrid** » Mon Sep 09, 2013 12:01 am

Bummer cant help you there.

Little Leonard · Post by **Little Leonard** » Thu Sep 12, 2013 10:18 pm

That's no good, on the mach screen it's shows that's I've not entered the dthc into the Gcode but I'm new to the cnc plasma table and not sure what or where to enter anything

abmagrum · Post by **abmagrum** » Thu Sep 12, 2013 10:22 pm

did you try tom at candcnc ?

I heard other people say he is a good helper.

Cutmaster 82 cut rates help

Cutmaster 82 cut rates help

Re: Cutmaster 82 cut rates help

Re: Cutmaster 82 cut rates help

Re: Cutmaster 82 cut rates help

Re: Cutmaster 82 cut rates help

Re: Cutmaster 82 cut rates help