Settings for .25 plate - Hypertherm 1000

[dreamer]

can anyone tell me what the settings for cutting .25 plate would be, I am running a powermax 1000 on plasma cam. thanks in advance

[knoeberm]

Have you tried the settings from the manual?
I have a PM45 on a DHC table, and here's what I'm using:
Cut Speed: 51 IPM
Cut height : 0.073
Pierce Height: 0.1
Pierce time: 0.41
Arc Voltage Shift: 1
45 amps

These gave me really good results.

HOpe this helps -

Marvin

[dreamer]

thanks Marvin that helps a lot. Harold