How do I?

[plain ol Bill]

Using CorelDraw X4 - How do I draw connected double lines? Let me explain a little further maybe. I want to draw interior lines on some cars that will cut wider - both sides of the line are the same but they are connected on the ends. I know there must be an easy way to do this but darned If I can figure out how. .
What I have been doing is copying a line, nudging the copy over and then close the ends using the three point curve tool and it just takes forever this way. Help needed guys

[SignTorch Vector Art]

contour command... curve (blue) is contoured outward (red), then break-apart the contour-group

contour.jpg

corel X6 has rounded corner contours, so the end-caps are rounded, I think X4 makes square ends

to get rounded end-caps in X4 you can set the outline thick with rounded miters and rounded end caps (green) and then hit arrange/convert-outline-to-object to get same as above (pink)

contour2.jpg

[plain ol Bill]

Gary thank you for the help. Sometimes I go crazy (short trip) trying to figure out how to do some things. You have helped make my life a little easier.

[Dawgonhawg]

Great info.