dxf files vs g codes
-
chevyguy55
dxf files vs g codes
Can anyone tell me why dxf files are downloaded and not g codes? My table runs with g codes using mach 3. Sure their are file that might need some changes(text) so if downloading files do both.
-
Batcat
- 1 Star Elite Contributing Member
- Posts: 21
- Joined: Thu Oct 29, 2009 9:15 pm
- Location: Eastover, South Carolina
Re: dxf files vs g codes
Not all controllers understand the same M codes, F codes or G codes. M codes are used to turn on and off things and F codes are used to control the cut speed. G codes are used for X & Y distance movement. Hope this helps.
Thanks
Batcat
Thanks
Batcat
5X10 Koike W/Microedge & 5X10 Vulcan W/D80
Hyp Sensor PHC Height Control both tables
Hyp PM 1250
Hyp PM 1000
Millermatic 250X
Hyp Sensor PHC Height Control both tables
Hyp PM 1250
Hyp PM 1000
Millermatic 250X
-
chipper
- 1 Star Member
- Posts: 23
- Joined: Fri Nov 21, 2008 8:18 pm
- Location: Extreme Northwest corner of the Texas Panhandle... Not Texas, China either....
Re: dxf files vs g codes
most people haved some sort of cam system that can take the dxf, and create g-code. I know in mastercam there are about 500 different post processors(which create the g-code), and there is only one that works for my machine. Uploading g-code is just begging for trouble. What if I gave you some g-code with a fatal z- in it, and caused 10,000 dollars damage to your machine? I wouldn't be downloading someone elses g-code and running it in my machines and be able to rest easy while the machine was running....
