Expanding my setup

wickedinhere · Post by **wickedinhere** » Thu Mar 15, 2012 2:49 pm

I have been working on getting a powder coating setup up and running i got the 4x4x8 oven finished and will start the booth this weekend.

corgster · Post by **corgster** » Thu Mar 15, 2012 3:34 pm

thats nice looking... about how long does it take it to get up to heat?

Post by **Loyd** » Thu Mar 15, 2012 8:28 pm

That is very nice. I have built 2 powder lines one was 1000' long and the other 500'. I am about to start one for myself and you are inspiring me to get started!! Keep us posted.
Loyd

Post by **Dawgonhawg** » Thu Mar 15, 2012 8:39 pm

Please post pictures of your booth also.
Thanks, Dawg

wickedinhere · Post by **wickedinhere** » Thu Mar 15, 2012 8:44 pm

Thanks, it hits 400 in 17 minutes I will post pics of my booth when i start.

AnotherDano · Post by **AnotherDano** » Thu Mar 15, 2012 11:06 pm

That looks like one of Teds ovens...
Welcome to the mad group of coaters,
Don't let it take over from the cutting!

wickedinhere · Post by **wickedinhere** » Fri Mar 16, 2012 12:49 pm

ITs a teds controlbox the rest is all mine. LOL

RobertJohnson · Post by **RobertJohnson** » Sun Mar 18, 2012 12:00 am

Very nice!

wickedinhere · Post by **wickedinhere** » Sun Mar 18, 2012 2:40 pm

THanks, i didnt get a chance to get my lumber for my booth but i will get it tomorrow and hopefully get it done this week.

Post by **FiveORacing** » Sun Mar 18, 2012 9:38 pm

Nice work!

wickedinhere · Post by **wickedinhere** » Tue Mar 20, 2012 10:55 am

I got a couple of the walls built and painted this morning. I hope they dry by this evening so i can stand them up. I put a fan pic up i will be using 2-20x20x1 filters more to come.

wickedinhere · Post by **wickedinhere** » Tue Mar 20, 2012 1:41 pm

Got 2 walls up and got the last wall built i just have to cut the opening for the filters then paint it and stand it up. Then start on the top then get the fan setup.

AnotherDano · Post by **AnotherDano** » Tue Mar 20, 2012 1:46 pm

Lookin' good!'

Consider placing a metal shield over the exposed elements to block the infrared heat.
IR waves travel to and heat up a part faster then convection heat.
That will save the lower hanging parts from uneven temps/overheating.

Don't ask me how I know...

wickedinhere · Post by **wickedinhere** » Tue Mar 20, 2012 2:03 pm

THanks dano, i have seen a few people do it and i think i will also. I have some extra sheet metal from the build that i can use.

Post by **Dawgonhawg** » Tue Mar 20, 2012 4:53 pm

Looking good..

ssyork · Post by **ssyork** » Tue Mar 20, 2012 5:19 pm

Looks awesome

wickedinhere · Post by **wickedinhere** » Wed Mar 21, 2012 11:51 am

I got my filter box built and the top done and painted just waiting on paint to dry.LOL It will probably take all day to dry cause its been raining like crazy.

Post by **Loyd** » Wed Mar 21, 2012 11:48 pm

Great looking job!
Loyd

wickedinhere · Post by **wickedinhere** » Thu Mar 22, 2012 10:14 am

I did a little work this morning. I need to go pick up some more stuff to finish it, lights and some more electrical boxes and silicone.

jmsrbrt · Post by **jmsrbrt** » Thu Mar 22, 2012 2:09 pm

Following your build, and I'm wondering, is this booth you're building a PAINT booth? Where you'll do the powder? Bob.

wickedinhere · Post by **wickedinhere** » Thu Mar 22, 2012 2:27 pm

THis is the powder coating booth only, this should cut down on alot of my painting but i will still do some painting.
Heres my filter setup i ended up 4 foot short on my 2x4 count.LOL

Garysbiz · Post by **Garysbiz** » Thu Mar 22, 2012 8:38 pm

What cfm is your fan and where did you get it, your set up is looking good and has me thinking! Thanks for the posts

wickedinhere · Post by **wickedinhere** » Thu Mar 22, 2012 8:40 pm

The fan is 1400cfm its on the small side(according to some people) but it pulls air pretty good. I got it at tractor supply its made by maxair 14 inch it comes with a shutter but i took it off.

Post by **Loyd** » Thu Mar 22, 2012 11:20 pm

Wicked....you probably know this...powder is very explosive. You should use plexiglass over your lighting and keep any sparks away....even static electricity from your body can cause an explosion...your setup looks great and will work very well just please be aware. I am not an expert but we did use 120,000 lbs of paint a year in the booth we constructed. I think you will have enough airflow.
Humbly,
Loyd

http://www.youtube.com/watch?v=rgbeJmv5 ... re=related

wickedinhere · Post by **wickedinhere** » Fri Mar 23, 2012 7:22 am

I am going to be using sealed lights in the booth and i am using a separate ground rod for the booth setup. Thanks for the video.

Expanding my setup

Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup

Re: Expanding my setup