Tool box for field cultivator

[K D Metalwerks]

My boss needed a box to bolt on his vertical tillage tool that can hold several sweeps along with the tool to replace them. I made this one to straddle a 6" beam near the front hitch. It attaches via 7" carriage bolts thru the bottom of the box and a strap at the bottom. I hand drilled a couple of 3/8" holes thru the side of the top and to corner of the box to hinge it. Hope someone can use it. Done in Plasmacam DesighEdge

8x18 tool box for cultivator.dxf

8x18 tool box for cultivator.jpg

[weldguy]

Thanks for the design this could be used for many doffernt applications

[K D Metalwerks]

Here is my finished product

tool box 2.jpg

tool box 1.jpg

[adbuch]

Excellent result! And it came out even better since you cut it on your Plasmacam table.

David

[plasmanewbie]

Turned out great, nice to be able to make this kind of thing on your own