Bridging Fonts for Plasma Cutting

Post by **adbuch** » Thu Mar 13, 2025 9:55 pm

Post by **TheFuzz** » Sat Mar 15, 2025 10:04 pm

Dave
I'm going to try to cut the Mustang in the next couple days. This will be the largest project I have cut. Thanks for all your help!!!

Post by **adbuch** » Sun Mar 16, 2025 1:56 am

TheFuzz wrote: Sat Mar 15, 2025 10:04 pm Dave
I'm going to try to cut the Mustang in the next couple days. This will be the largest project I have cut. Thanks for all your help!!!

You are quite welcome! Let us know how it turns out.
David

Post by **TheFuzz** » Mon Mar 24, 2025 3:36 pm

Sir

Here are the two signs you helped me with. Still need to put the finish on them. They turned out great.

Post by **adbuch** » Mon Mar 24, 2025 10:04 pm

Those look great! Thanks for sharing your finished pieces.
David

Post by **acourtjester** » Tue Mar 25, 2025 10:25 am

great results, very clean cuts show how great planning can end up in a desired finished project.

Post by **kicktillmonday** » Tue Mar 25, 2025 11:44 am

Those turned out awesome, very nice work

Post by **TheFuzz** » Mon Mar 31, 2025 9:26 pm

Thank you! Hats off to David for all his help.

Post by **adbuch** » Mon Mar 31, 2025 9:45 pm

TheFuzz wrote: Mon Mar 31, 2025 9:26 pm Thank you! Hats off to David for all his help.

Happy to help - as always.

David

Bridging Fonts for Plasma Cutting

Re: New Guy

Re: Bridging Fonts for Plasma Cutting

Re: Bridging Fonts for Plasma Cutting

Re: Bridging Fonts for Plasma Cutting

Re: Bridging Fonts for Plasma Cutting

Re: Bridging Fonts for Plasma Cutting

Re: Bridging Fonts for Plasma Cutting

Re: Bridging Fonts for Plasma Cutting

Re: Bridging Fonts for Plasma Cutting