GM Gen V LTx Engine Exhaust & Intake manifold Flanges & Storage Covers

[AdamE]

Intake and Exhaust Manifold Flanges for Gen V LTx direct injected (non-supercharged) engines. Specifically for a 6.6 liter L8T engine.

Gen V LTx Intake manifold flange and storage cover.dxf

GM Gen V LTx Engines Exhaust Flange and Storage Cover.dxf

20241203_050856.jpg

20241203_050934.jpg

[TJS]

Thanks for the share. I think this would also on the 5.3's with direct injection as well.

[AdamE]

Thanks for the share. I think this would also on the 5.3's with direct injection as well.

Yeah no problem and i believe youre correct, from what i have seen all of the non-supercharged gen v LT engines use the same bolt pattern and ports, the supercharged gen v engines have the same ports as well but the bolt pattern is different. I dont know for sure though so i will leave that for whoever to determine on their own.

[weldguy]

Great share, thank you!

[J-SIG]

Thanks for sharing, I have a friend that will want 2 sets right away!

Jeff

[AdamE]

Great share, thank you!

you bet!

[AdamE]

Thanks for sharing, I have a friend that will want 2 sets right away!

Jeff

you bet!

[Red6rubicon]

You da man! thank you

[AdamE]

You da man! thank you

you bet!

[tinspark]

Intake and Exhaust Manifold Flanges for Gen V LTx direct injected (non-supercharged) engines. Specifically for a 6.6 liter L8T engine.

Gen V LTx Intake manifold flange and storage cover.dxf
GM Gen V LTx Engines Exhaust Flange and Storage Cover.dxf

20241203_050856.jpg
20241203_050934.jpg

Good idea. Storage covers would Keep the young grandkids from dropping M&M's or worse in their new hiding place!

[AdamE]

Intake and Exhaust Manifold Flanges for Gen V LTx direct injected (non-supercharged) engines. Specifically for a 6.6 liter L8T engine.

Gen V LTx Intake manifold flange and storage cover.dxf
GM Gen V LTx Engines Exhaust Flange and Storage Cover.dxf

20241203_050856.jpg
20241203_050934.jpg

Good idea. Storage covers would Keep the young grandkids from dropping M&M's or worse in their new hiding place!

Thats right! I actually covered one side of them in rtv. Then power washed it with some hot water to clean it up real nice to make the rebuild process a little cleaner.

[TJS]

Adam,
I have not downloaded yet. You show two intake plates. One with port holes and one without. Does your file include both ?

[tinspark]

Intake and Exhaust Manifold Flanges for Gen V LTx direct injected (non-supercharged) engines. Specifically for a 6.6 liter L8T engine.

Gen V LTx Intake manifold flange and storage cover.dxf
GM Gen V LTx Engines Exhaust Flange and Storage Cover.dxf

20241203_050856.jpg
20241203_050934.jpg

Good idea. Storage covers would Keep the young grandkids from dropping M&M's or worse in their new hiding place!

Thats right! I actually covered one side of them in rtv. Then power washed it with some hot water to clean it up real nice to make the rebuild process a little cleaner.

Super good idea
The one thing that I love about CNC, Skys the limit on making imagination reality.
Then that idea is easily repeatable if need be.