400mm TV Mounting Plate
-
kicktillmonday
- 2.5 Star Elite Contributing Member
- Posts: 214
- Joined: Tue Aug 30, 2022 9:34 am
400mm TV Mounting Plate
Not sure if this will be of much use to anyone but I hung a TV from the ceiling the shop and couldn't find a simple flat backing plate anywhere with a 400mm bolt pattern so I drew this up and cut it from 3/16" HR. Could be easily modified from smaller patterns also.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4x8 table
Powermax 65
Powermax 65
-
djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 2086
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: 400mm TV Mounting Plate
That's slick. Too bad I don't need one of these.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 11441
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: 400mm TV Mounting Plate
You did a nice job drawing that up. I opened it up to check it out. Great work!!
Thanks for sharing.
David
Thanks for sharing.
David
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
kicktillmonday
- 2.5 Star Elite Contributing Member
- Posts: 214
- Joined: Tue Aug 30, 2022 9:34 am
Re: 400mm TV Mounting Plate
Thanks guys. I know, not a useful design for most but hopefully someone can use it in the future. I always check here first before drawing anything like this and have been surprised what I was able to find and save myself some time on.
DIY 4x8 table
Powermax 65
Powermax 65
