I am running a jds garage plan table. I use fusion 360 and open builds post process. For some reason last night(after about 25 parts cut) now the z axis at the start is raising up and crashing against the stops. Nothing with the coding has been changed. I have the THC on idle. I even tried past jobs and they all are trying to run up about 7-8” when you start a job. Attached is the g code.
Any help would be great
CNC z axis crashing
-
jfields1818
- 1/2 Star Member
- Posts: 1
- Joined: Wed May 22, 2024 8:05 pm
CNC z axis crashing
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 2024
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: CNC z axis crashing
Try manually rezeroing your z just above the material. It looks like your zero is outside the travel of your axis.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
tcaudle
- 4 Star Elite Contributing Member
- Posts: 1513
- Joined: Tue Feb 28, 2012 6:47 pm
Re: CNC z axis crashing
post this over on the JDS forum . This is for CandCNC hardware/software.
-
asuratman
- 2 Star Member
- Posts: 59
- Joined: Tue Apr 17, 2018 11:17 am
Re: CNC z axis crashing
jfields1818,
Did you ever run JDS garage's THC ? How difficult compare to other THCs such as Proma 150 if you ever run ?
Did you ever run JDS garage's THC ? How difficult compare to other THCs such as Proma 150 if you ever run ?
