Hi Team
My name is David Aguilar, I have a 625 Tomahawk plasma Cutter, unfortunately we were noticed that two pins that are located in the torch connector to the machine were broken and we need to replace them.
I try to order from Lincoln but they said that these pins are not sold separately
Do you know were can I find these pins?
Attached you can find some pictures of the Pin's and Connector
Thank You in advance for your support
DA
Lincoln 625 - Broken pin at torch connector
-
Daaguilar
- 1/2 Star Member
- Posts: 1
- Joined: Mon Aug 05, 2024 8:28 pm
Lincoln 625 - Broken pin at torch connector
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
weldguy
- 4.5 Star Elite Contributing Member
- Posts: 2186
- Joined: Fri Apr 17, 2009 11:48 am
Re: Lincoln 625 - Broken pin at torch connector
It may be very difficult to find that exact pin, you may be best just to try and solder the 2 pieces back together. Let us know what you end up doing to fix that.
-
Jzulich
- 1/2 Star Member
- Posts: 1
- Joined: Wed Oct 30, 2024 6:30 pm
Re: Lincoln 625 - Broken pin at torch connector
I fixed mine, removed the top male broken end i had to grind off the plastic to grab with pliers. Drilled a #53 hole 3/16” deep. Purchased 1/16 brass rod. Pressed in hole and cut off and dressed the end. Also i did find the complete part in china. Contact me for part number
