THC Sliding mechanisms RATTMMOTOR HBX1605 Linear Motion Guide

[Rodw]

Yes, I ran mine @ 64 volt AC which was about 90 volts DC. It was a bit extreme but we could reduce the amps when at constant velocity to let them cool

[N2 Welding]

Sounds like you got pretty heavily involved in programming every little thing about the power delivery for motor controls.

[N2 Welding]

I stated a parts gathering thread to tabulate costs of the table build. I’ll be editing the 1st post in this following thread with all the items used and total cost of build to date.

https://www.plasmaspider.com/viewtopic. ... 46#p230946

I linked this thread in that thread as well.