Pricing on steel supplied jobs

Learn & share techniques, strategies, and experiences on marketing your plasma cut products in this forum.
Post Reply
cutnweld
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 312
Joined: Mon Oct 14, 2019 1:47 pm

Pricing on steel supplied jobs

Post by cutnweld »

I am curious what I should be charging for cutting heavy materials. When I need to run my machine wide open to the point of exhaustion, is it worth something? Like cutting 1.75" thick plate for example, 300 inches at 4 or 5 ipm. It takes awhile, but it saves the other shop I'm doing it for a day or more of grinding after they would cut it by hand with a torch. Like it seems cutting by the hour is to cheap unless the rate is high, there is no time spent doing rapids or touchoffs or anything. It is to the grindstone the whole time.
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2024
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Pricing on steel supplied jobs

Post by djreiswig »

I think what I'd do is figure out what you think it costs them to do it by hand and then discount it so they feel like they're saving money. Plus they are also ending up with a better product for their customers in the end.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10135
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Pricing on steel supplied jobs

Post by adbuch »

If you are billing by the hour, then perhaps have different hourly rates depending on the material thickness, or as djreiswig says - just charge them by the job. I think it all depends on how badly you need (or want) the work. I don't do cnc plasma commercially, but I do cnc machining jobs and charge by the job. I figure in programming time, set-up time, actual run time, materials costs, tooling, any post processing (special finish work or plating), etc.

David
arnegrant
2 Star Member
2 Star Member
Posts: 88
Joined: Sun Jun 12, 2022 8:07 pm

Re: Pricing on steel supplied jobs

Post by arnegrant »

Billing hourly is hard to come out.

Bill lump sum is hard to get work.

I usually do the math three ways

1. Gut feel.
2. Detailed takeoff (math with all overhead)
3. Past jobs
And if you can figure how much money is on the table.

Then average or take the high.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10135
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Pricing on steel supplied jobs

Post by adbuch »

adbuch wrote: Mon Jul 03, 2023 8:37 pm I don't do cnc plasma commercially, but I do cnc machining jobs and charge by the job. I figure in programming time, set-up time, actual run time, materials costs, tooling, any post processing (special finish work or plating), etc.

David
When I made the statement above, I was describing the variables that I figure into calculating the quoted price. I don't "show my work" and simply quote price per part. Often the customer wants quotes for say 100 parts, 500 parts, 1000 parts. These are figured per part and the price per part is shown on the quote. I don't think they care how many hours it takes, details on programming, set-up time, etc. They just want to know the price per part and how soon can they have their parts. That has been my personal experience over the last 20 years or so.

David
Post Reply

Return to “Pricing, Advertising, & Marketing Your Products Forum”