4 x 8 Plasma Table build

Post by **acourtjester** » Thu Apr 27, 2023 5:16 pm

Here are two 3-D printed torch holders I have developed and used, the floating head I gave to another guy building a table. The magnetic also has a floating head switch incorporated in it. I can give you the files if you want.
viewtopic.php?f=122&t=32753
https://plasmaspider.com/viewtopic.php?f=122&t=32623

Post by **adbuch** » Fri Apr 28, 2023 12:53 am

acourtjester wrote: Thu Apr 27, 2023 5:16 pm Here are two 3-D printed torch holders I have developed and used, the floating head I gave to another guy building a table. The magnetic also has a floating head switch incorporated in it. I can give you the files if you want.
viewtopic.php?f=122&t=32753
https://plasmaspider.com/viewtopic.php?f=122&t=32623

Thanks for sharing these Tom! It would be nice if this forum had some sort of organized area set aside specifically for 3D Printed Parts files and designs. Something different that the 3D Printers section of the forum. Or perhaps a subset heading in that category.

David

mcmental · Post by **mcmental** » Fri Apr 28, 2023 1:54 am

acourtjester wrote: Thu Apr 27, 2023 5:16 pm Here are two 3-D printed torch holders I have developed and used, the floating head I gave to another guy building a table. The magnetic also has a floating head switch incorporated in it. I can give you the files if you want.
viewtopic.php?f=122&t=32753
https://plasmaspider.com/viewtopic.php?f=122&t=32623

Tom that would be great to grab those files please and any photos of your support too.
Thank you

Post by **adbuch** » Fri Apr 28, 2023 2:13 am

mcmental wrote: Fri Apr 28, 2023 1:54 am
acourtjester wrote: Thu Apr 27, 2023 5:16 pm Here are two 3-D printed torch holders I have developed and used, the floating head I gave to another guy building a table. The magnetic also has a floating head switch incorporated in it. I can give you the files if you want.
viewtopic.php?f=122&t=32753
https://plasmaspider.com/viewtopic.php?f=122&t=32623
Tom that would be great to grab those files please and any photos of your support too.
Thank you

It would also be nice if this forum allowed stl files to be uploaded to share. But I think if you PM Tom he will email you the files.
David

Post by **acourtjester** » Fri Apr 28, 2023 8:53 am

PM sent to mcmental about the files.
Admin is just aware of the trolls out there wanting to do bad, and the file format they use.

mcmental · Post by **mcmental** » Fri Apr 28, 2023 9:46 am

Thank you

Post by **adbuch** » Fri Apr 28, 2023 10:16 am

acourtjester wrote: Fri Apr 28, 2023 8:53 am PM sent to mcmental about the files.
Admin is just aware of the trolls out there wanting to do bad, and the file format they use.

Post by **admin** » Fri Apr 28, 2023 3:58 pm

adbuch wrote: Fri Apr 28, 2023 2:13 am
mcmental wrote: Fri Apr 28, 2023 1:54 am
acourtjester wrote: Thu Apr 27, 2023 5:16 pm Here are two 3-D printed torch holders I have developed and used, the floating head I gave to another guy building a table. The magnetic also has a floating head switch incorporated in it. I can give you the files if you want.
viewtopic.php?f=122&t=32753
https://plasmaspider.com/viewtopic.php?f=122&t=32623
Tom that would be great to grab those files please and any photos of your support too.
Thank you
It would also be nice if this forum allowed stl files to be uploaded to share. But I think if you PM Tom he will email you the files.
David

Stl file format upload capability was added a few months ago. Is anyone having an issue with uploading stl files?

Post by **TJS** » Fri Apr 28, 2023 4:21 pm

To the admin. Not sure why my pics are not showing up. I have to contact my web hosting company.

Post by **acourtjester** » Fri Apr 28, 2023 5:08 pm

Test file 3 inch knob file looks OK

3 inch knob with oval holes.stl

3 inch YES.dxf

Post by **adbuch** » Fri Apr 28, 2023 6:51 pm

admin wrote: Fri Apr 28, 2023 3:58 pm
adbuch wrote: Fri Apr 28, 2023 2:13 am
mcmental wrote: Fri Apr 28, 2023 1:54 am

Tom that would be great to grab those files please and any photos of your support too.
Thank you
It would also be nice if this forum allowed stl files to be uploaded to share. But I think if you PM Tom he will email you the files.
David
Stl file format upload capability was added a few months ago. Is anyone having an issue with uploading stl files?

Thanks Jason! I had not tried it lately, but was just remembering from back when had I previously tried to do it. Thanks for the update.
David

Post by **admin** » Fri Apr 28, 2023 11:52 pm

TJS wrote: Fri Apr 28, 2023 4:21 pm To the admin. Not sure why my pics are not showing up. I have to contact my web hosting company.

No sweat. We’ve located your pics, we’re hosting them on our server, and your posts look 100% good again

Post by **TJS** » Mon May 01, 2023 6:53 am

Thanks. The company that hosts my website is blaming it on Register dot com and Register dot com states it is not them. Round and roundy.

Post by **admin** » Mon May 01, 2023 11:49 am

TJS wrote: Mon May 01, 2023 6:53 am Thanks. The company that hosts my website is blaming it on Register dot com and Register dot com states it is not them. Round and roundy.

No problem. It's not your domain registration company, it's your web host. Likely their software picked up on these images loading a lot when this thread became active again and they cut you off. That's a bad host.

4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build

Re: 4 x 8 Plasma Table build