MORE CRICKETS
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3486
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
MORE CRICKETS
Amazing.
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1185
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: MORE CRICKETS
Your time and energy are your own business but posting on a forum about the lack of posts on a forum seems counterproductive to accomplishing all the goals of 3d printing and lasering and plasma cutting and accessory development that you post about here. I probably wouldn't have even responded but I'm on vacation enjoying some coffee while perusing the forums and chatting with table owners so thought I'd go ahead.
I wish everyone I encounter nothing but success and happiness. Get out there and make some stuff - if you're too tired, take a nap and then get out there!
I wish everyone I encounter nothing but success and happiness. Get out there and make some stuff - if you're too tired, take a nap and then get out there!
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
- ben de lappe
- 4 Star Elite Contributing Member
- Posts: 1294
- Joined: Mon Aug 03, 2009 9:37 am
- Location: North Mississippi
Re: MORE CRICKETS
I don't care if you broke your spine...just get out there and make it happen! Consider it your new therapy.
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3486
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: MORE CRICKETS
Yep. I have a lot of goals. Or maybe we should call them, "Ambitions." I have the machines, and the materials, and the knowledge, and the software. What I lack is the ability to allow the rapid decay of society to roll off of my back. Humanity at large continues to be a huge disappointment.
Joe
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
-
- 6 Star Elite Contributing Member
- Posts: 10138
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: MORE CRICKETS
rdj357 wrote: ↑Mon Dec 19, 2022 11:27 am Your time and energy are your own business but posting on a forum about the lack of posts on a forum seems counterproductive to accomplishing all the goals of 3d printing and lasering and plasma cutting and accessory development that you post about here. I probably wouldn't have even responded but I'm on vacation enjoying some coffee while perusing the forums and chatting with table owners so thought I'd go ahead.
I wish everyone I encounter nothing but success and happiness. Get out there and make some stuff - if you're too tired, take a nap and then get out there!
-
- 3.5 Star Member
- Posts: 611
- Joined: Thu Dec 05, 2019 11:33 am
Re: MORE CRICKETS
If that's what's keeping you from achieving your goals or pursuing your ambitions then you are victim of the very system you despise and they have you right where they want you. They have won, you have lost.Joe Jones wrote: ↑Mon Dec 19, 2022 2:30 pm Yep. I have a lot of goals. Or maybe we should call them, "Ambitions." I have the machines, and the materials, and the knowledge, and the software. What I lack is the ability to allow the rapid decay of society to roll off of my back. Humanity at large continues to be a huge disappointment.
Joe
It is my opinion that society has been engineered to keep you distracted, down in the dumps and thinking all hope is lost. It makes it easier for them to accomplish their goals. F*** them, fight back, be positive, beat the system, question everything, do nothing they demand or try to manipulate you into. Get done the things you want to do and have a positive attitude.
It is safe to say every member on this forum is more talented and resourceful than any of those in power, and they know it. Once a larger majority realizes this, they are F***ed. It's billions of people against a few hundred feeble scoundrels, should be easy but everyone needs to rise up. Rise up Joe, show those demons who's boss and encourage others to do the same.
Tracker CNC 4x4
Hypertherm 85
Hypertherm 85
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1185
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: MORE CRICKETS
Yep - Humanity is separate from my own personal goals and ambitions. As Garrison Kellior said in his Lake Woebegon radio show years ago, "Life is what you make it. Make the best of it."ben de lappe wrote: ↑Mon Dec 19, 2022 11:39 amI don't care if you broke your spine...just get out there and make it happen! Consider it your new therapy.
And so it is!
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3486
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: MORE CRICKETS
My uncle had the same surgery a coupe of years ago. I have his nearly identical X-rays too. Getting old is not for sissies!
Joe
Joe
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1185
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: MORE CRICKETS
That is a fact! I fell about 12’ in late July 2019 and broke my back (50% compression fracture of L1). They fused 5 discs with those rods and screws and picked out the bits of bone that were impinging on my spinal cord. I was in a back brace for 7 months. Right after I got home from the hospital I noticed black streamers in my left eye, turned out to be a torn retina so it was repaired by laser surgery. After 7 months of back brace I was released fully back to work. 1 year almost to the day after the first retina surgery I had to have the same thing in my other eye.
I’m slowly being rebuilt. Lol
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3486
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: MORE CRICKETS
I am glad you are still functional. Other people aren't so fortunate.
Joe
Joe
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
- ben de lappe
- 4 Star Elite Contributing Member
- Posts: 1294
- Joined: Mon Aug 03, 2009 9:37 am
- Location: North Mississippi
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1185
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: MORE CRICKETS
Having lost a spouse to a sudden, unpredictable medical event I can absolutely and empathetically agree. I thank God every day for the ability to live, the ability to work. the ability to walk, the ability just to breathe another minute. I don't believe God is picking who makes it and who doesn't but I do believe we should use every opportunity of every day we have available in the pursuit of doing all the good we can, in all the ways we can, to all the people we can, in all the places we can, at all the times we can, with all the zeal we can, as long as we ever can.
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
- ben de lappe
- 4 Star Elite Contributing Member
- Posts: 1294
- Joined: Mon Aug 03, 2009 9:37 am
- Location: North Mississippi
Re: MORE CRICKETS
Having lost a spouse to a sudden, unpredictable medical event I can absolutely and empathetically agree. I thank God every day for the ability to live, the ability to work. the ability to walk, the ability just to breathe another minute. I don't believe God is picking who makes it and who doesn't but I do believe we should use every opportunity of every day we have available in the pursuit of doing all the good we can, in all the ways we can, to all the people we can, in all the places we can, at all the times we can, with all the zeal we can, as long as we ever can.
[/quote]
Absolutely my friend. I remember well, your spouse and your accident. My comment about the broken spine was a joke, probably no one got but you. Also a testament to you picking yourself up, doing the hard work and making yourself function. All I can say is when one's son becomes paralyzed and eventually passes one must laugh in order to survive. Unfortunate side effect is a slightly warped sense of humor.
Positive attitude is everything.
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1185
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: MORE CRICKETS
Amen!
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3486
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: MORE CRICKETS
Positive attitude is not everything. Positive attitude is only voltage. Voltage is nothing without amperage. I guess that's WATTS wrong with me!
Joe
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer
Bernardo Mach 55 TON Ironworker
FREE DesignEdge Training Online Via ZOOM!