Hey all. I’m new to Plasma Spider and I’m by no means a pro at plasma cutting in general. I use Inkscape primarily for my drawing and command CNC on a StarLab table. Any tips you guys have are very much appreciated! I’m currently trying to make sure my machine is properly kept in sub freezing temps so any tips on that are very welcome!
Thanks and happy cutting!
Philip
New Guy
-
TJS
- 4 Star Member
- Posts: 832
- Joined: Wed Nov 26, 2014 1:22 pm
- Location: Fairfield, CT.
- Contact:
-
plasmanewbie
- 5 Star Elite Contributing Member
- Posts: 2927
- Joined: Thu Jul 24, 2008 11:15 am
Re: New Guy
Welcome to the site. Plenty of help here, if you have any specific questions use the search box and if you can;t find the answer just ask. The only tip I have for a sub freezing shop would be buy a furnace! Yikes, that's gotta suck.
-
acourtjester
- 6 Star Elite Contributing Member
- Posts: 8528
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: New Guy
Welcome aboard Philip
Well we all need to live somewhere Sub Freezing!
from a guy who hides in the house at 35 degree 
Lots of help with question, time to put another log on the fire and do some future project planning.
Well we all need to live somewhere Sub Freezing!
from a guy who hides in the house at 35 degree Lots of help with question, time to put another log on the fire and do some future project planning.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
