Hello all,
I am new to this site am I joined because I got myself a AAS plasma table. I have always wanted a plasma table just for personal use but never could afford one.
The plasma table looks almost new but it was on a local auction so it didn't come with any software or much of anything else. It has a box on the side of it with a couple connectors and a power cord. I have a spare computer and a plasma cutter but have no idea how to hook it up or what software I need with it.
I was hoping someone can tell me what I need to get it up and running.
Need help with hooking up an Accurate Arc System plasma cutter
-
Belix9999
- 1/2 Star Member
- Posts: 1
- Joined: Fri Apr 01, 2022 10:34 pm
Need help with hooking up an Accurate Arc System plasma cutter
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
AlphaTekErik
- 1 Star Member
- Posts: 12
- Joined: Fri May 06, 2022 1:16 pm
- Contact:
Re: Need help with hooking up an Accurate Arc System plasma cutter
id need alot more information to help you get some progress. are you missing motors? are there any drives or hardware you didnt picture?
-
acourtjester
- 6 Star Elite Contributing Member
- Posts: 8183
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Need help with hooking up an Accurate Arc System plasma cutter
I would open the box up and check it looks like it was to be hooked to a PC via the parallel printer port. If you find drivers and power supplies inside you may just need to buy a different BOB board to communicate with your computer. That will dictate what software you use I see the motors so you may have fallen into a great deal. Many here that can help you get it working.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
SegoMan DeSigns
- 4 Star Member
- Posts: 984
- Joined: Sat Jan 06, 2018 4:45 pm
Re: Need help with hooking up an Accurate Arc System plasma cutter
Did you research the previous owner from the auctioneer? Maybe he could help on the software side of things.. Same with the Mfr once you have the original owners name.
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 10138
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Need help with hooking up an Accurate Arc System plasma cutter
acourtjester wrote: ↑Fri May 06, 2022 6:29 pm I would open the box up and check it looks like it was to be hooked to a PC via the parallel printer port. If you find drivers and power supplies inside you may just need to buy a different BOB board to communicate with your computer. That will dictate what software you use I see the motors so you may have fallen into a great deal. Many here that can help you get it working.
-
weldguy
- 4.5 Star Elite Contributing Member
- Posts: 2187
- Joined: Fri Apr 17, 2009 11:48 am
Re: Need help with hooking up an Accurate Arc System plasma cutter
That control box looks like it may be a C&CNC control setup. I would open it up to confirm. If that is the case I wouldn't change anything and obtain the software from C&CNC and start from there. Get the machine moving and then move on to wiring the plasma into it. Open it up and send some pics
