ft02 and mp3700

Post by **mcmental** » Fri Jul 02, 2021 9:05 am

hi there i have the ft02 sensor to go on the mp3700 and i got it with 12 pin round plug for the sensor and screwed terminals for the rear of mp3700 just struggling to work out where the yellow wire(in the blue plug) should be connected, any help would be great thanks.

cnc1.jpeg

cnc2.jpeg

cnc3.jpeg

Post by **acourtjester** » Fri Jul 02, 2021 9:47 am

What about tech support????

Post by **mcmental** » Fri Jul 02, 2021 9:54 am

ive emailed them and also posted on the forum, no responses so thought i would ask here too so i can get on with the build.

Post by **djreiswig** » Fri Jul 02, 2021 10:47 am

You have an answer.
https://www.candcnc.net/supportforum/vi ... 342#p18342

Post by **mcmental** » Fri Jul 02, 2021 10:53 am

All sorted now thanks

Post by **weldguy** » Fri Jul 02, 2021 12:23 pm

Can you post your solution for others who may have this issue in the future?

Post by **mcmental** » Sat Jul 03, 2021 2:10 am

i have to remove the plugs that came on the cable and fit them as per the manual that is available to download.

ft02 and mp3700

ft02 and mp3700

Re: ft02 and mp3700

Re: ft02 and mp3700

Re: ft02 and mp3700

Re: ft02 and mp3700

Re: ft02 and mp3700

Re: ft02 and mp3700