that's fine, I was interested to see how you were handling the thc stuff via the pp which you are not.
I mainly use sheetcam and estlcam as a second choice (estlcam for milling / router only, not used for plasma).
not enough hours in the day for all the different options
Vectrics Cut2D PRO software for Plasma Cutting?
-
robertspark
- 4.5 Star Elite Contributing Member
- Posts: 1831
- Joined: Mon Jun 12, 2017 6:43 pm
-
Greolt
- 2.5 Star Member
- Posts: 112
- Joined: Mon May 18, 2015 12:36 am
Re: Vectrics Cut2D PRO software for Plasma Cutting?
Get asked a lot to share my Cut2D plasma PP. Because it is machine/control software specific I decline.
It was a very cold and miserable Saturday today, so I spent the time and put together a guide to setting up a Post Processor for Cut2D plasma.
Please see this as a guide only. I do not have Mach3 running my CNC plasma, so it is not tested and may have errors.
https://youtu.be/A_T_-frvm0k
It was a very cold and miserable Saturday today, so I spent the time and put together a guide to setting up a Post Processor for Cut2D plasma.
Please see this as a guide only. I do not have Mach3 running my CNC plasma, so it is not tested and may have errors.
https://youtu.be/A_T_-frvm0k
