Cool shop tools or homemade ideas to help around the shop

[6 cylinder puller]

Anyone have anything cool they built to help around the shop like storage, help with plasma cutting or fab work maybe welding or anything helpful or saved you money

[harrymorley]

every time I put a sheet of steel on the table and only use a portion of it , I use a magic marker and put a number on it. I save it as " table layout # whatever " Next time I load that sheet , i just import the " table layout number " from the sheet . Saves alot of time . This way I immediately know where all the cutouts are .

[acourtjester]

Here are a few clamps I make that were posted here long time back, for my welding table. Portable band saw I cut the parts for it on my table, gave the plans to many. Cut all the custom shaped parts for this 2" X 72" belt grinder.
https://www.youtube.com/watch?v=IR2jbiY ... e=youtu.be

DSCN2483 (2).JPG

DSCN2480.JPG

DSCN2503 (2).JPG

DSCN2816.JPG

DSCN2673.JPG

[Rodw]

deleted

[weldguy]

Some severe great ideas here! Following this thread

[Scratch]

Here are a couple of things I made that I've found useful. I call this a tank spider:

20200629_124027.jpg

This is handy:

20200629_123854.jpg

20200629_123821.jpg

[Motoxrdr]

Nothing too fancy but here is some smaller shelves i built too hold rivets and bits and hardware

[acourtjester]

Configured a new cart for my Hypertherm 65, cut down a hand truck from HF. Easy roll when needed.

DSCN4307.jpg

DSCN4305.jpg

DSCN4306.jpg

DSCN4304.JPG

[SkinnyPedal]

Following