20mm (3/4 inch) mild steel plate cut with powermax 105

Cut quality issues can be discussed here, most common issues have been discussed here and should help you.
Post Reply
arumalla58
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Sun Feb 23, 2020 1:26 am

20mm (3/4 inch) mild steel plate cut with powermax 105

Post by arumalla58 »

Hi,

Could you please help out in cutting of 20mm thick mild steel plate with Hypertherm powermax 105 amps.

what are the parameters i have to set ?

Thanks
VR
Old Iron
3.5 Star Member
3.5 Star Member
Posts: 681
Joined: Wed Nov 26, 2014 5:12 pm

Re: 20mm (3/4 inch) mild steel plate cut with powermax 105

Post by Old Iron »

Google for a Powermax 105 manual. All the settings are in it.
Or just download the file I posted below.
OM_807390_R3_Powermax105.pdf
(5.74 MiB) Downloaded 46 times
OM_807390_R3_Powermax105.pdf
(5.74 MiB) Downloaded 46 times
weldguy
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2187
Joined: Fri Apr 17, 2009 11:48 am

Re: 20mm (3/4 inch) mild steel plate cut with powermax 105

Post by weldguy »

Or shortcut right to cut charts available here https://www.plasmaspider.com/Powermax 105 Cut Charts
arumalla58
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Sun Feb 23, 2020 1:26 am

Re: 20mm (3/4 inch) mild steel plate cut with powermax 105

Post by arumalla58 »

thanks
Post Reply

Return to “Plasma Cut Quality Forum”