Part will not Load correctly
-
Azperformancetech
- 1/2 Star Member
- Posts: 3
- Joined: Thu Jul 25, 2019 8:26 am
Part will not Load correctly
When I Import a drawing/part it will not load correctly. It’s a simple drawing of a circle with one flat edge to it. When I import it into sheet cam it ends up just showing a 6inch arc with a line connecting the ends of the arc together.
-
djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 2069
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Part will not Load correctly
Does the drawing use splines? SheetCam doesn't work well with splines.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
Les Newell
- 2.5 Star Member
- Posts: 188
- Joined: Tue Mar 22, 2016 10:30 am
Re: Part will not Load correctly
Could you post a copy of the drawing here so I can take a look.
